Updating the Firmware
• Never switch off the power while downloading. Switching off the power while the new software is
being downloaded can damage the boot files in the controller.
Setting the Machine in Firmware Update Mode
1. Turn off the power switch.
2. Remove the SD card [A] cover.
3. Insert the SD card [B] that contains the firmware in SD card slot C3.
4. Turn on the machine.
RICOH
Aficio SP 8100 DN
Wait about 60 sec. for the ‘Power’, ‘Error’, and ‘Data In’ LEDs on the operation panel to light, and
for the first module selection to appear.
Web Support
5. Service Tables
278
To Next Page
Loading...
