007 NIB Summary NIB (Network Interface Board) Summary
SP6-xxx: Peripherals
6105
Staple Adj Staple Position Adjustment
[–3.5~+3.5 / 0.0 / 0.5 mm step]
Adjusts the staple position in the main scan direction when using the two-tray finisher.
6113
Punch Pos Adj Punch Hole Position Adjustment
Adjusts the punch hole position.
SP6113 1: 2-hole punches for Japan, North America, Europe, and 4-hole punches for Northern
Europe.
SP6113 2: 3-hole punches for North America, and 4-hole punches for Europe.
001 2-Hole [–7.5~+7.5 / 0 / 0.5 mm steps]
002 3-Hole [–7.5~+7.5 / 0 / 0.5 mm steps]
SP7-xxx: Data Log
7001
Main M Op Time Main Motor Operation Time
Display: 000 0000~999 9999 min
The number of prints and drive time for drum revolutions can be obtained by counting the main
motor revolution time. If the amount of time required for the drum to revolve to print 1 copy
increases, this data combined with the number of copies can be used to analyze problems and
could be useful for future product development.
7401
SC Counter Total SC Counter
Displays the total number of service calls that have occurred. Display range: 0000~9999
7403 Latest10SCLog SC History (Latest 10 only)
001 Latest
Displays the most recent service calls successive groups of 10.
002 Latest 1
5. Service Tables
238
To Next Page
Loading...
