Ricoh A-P4 - To Select the Target for the Debug Log File

ON
6. Push [#Enter].
<On/Off>
*ON
7. Push [Esc].
SP5857-001
On/Off
8. Do the next procedure to select the target.
To Select the Target for the Debug Log File
You can select either the HDD (default) or the SD card as the target. This procedure shows you how to
select the SD card.
1. Push .
SP587-002
Target
2. Push [#Enter].
<Target>
*2:HDD
3. Push .
<Target>
3:SD
4. Push [#Enter].
<Target>
*3:SD
5. Push [Esc] twic.
SP5857 >>
Save Debug Log
5. Service Tables
292
5