4. HDD unit bracket [C] ( x 4, x 2)
5. Remove the NVRAM [D] from the controller board and replace it with the new chip.
• Make sure that the notch of the new NVRAM is aligned properly as shown above before you
try to install it.
Downloading NVRAM Data (SP5825)
The following data are not downloaded from the SD card:
• C/O, P/O Counter (SP7-006-** C/O, P/O Count Display)
• Duplex, A3/DLT/Over 420 mm.
3. Replacement and Adjustment
138
To Next Page
Loading...
