Exit Guide Plate and De-Curler Rollers
The exit guide plate [A] also functions as a pressure roller stripper. The exit guide plate can be moved in
order to remove jammed paper.
Stacking has been improved by mounting a face-curl correction mechanism at the paper exit roller.
Two de-curler rollers [B] and [C] have been added under the exit roller [D] to correct the curl that paper
acquires during transport through the fusing unit.
Pressure Roller
The pressure springs [A] apply constant pressure between the hot roller [B] and the pressure roller [C]. The
applied pressure can be changed by adjusting the position of the pressure springs. The left position [D] is
Image Fusing and Paper Exit
361
To Next Page
Loading...
