2. To remove an SD card, push the SD card in carefully to release it, and then remove it from
the slot.
• To prevent damage to the SD card or the slot lock, always push the card in to release it and then
remove it.
Merging Applications on One SD Card
Location of SD Card Slots
The machine has three SD card slots:
• C1 is for applications provided on SD cards. If more than one option is to be installed, the applications
must be merged on the same SD card. (see ‘Merging Applications’).
• C3 is used for servicing only. Otherwise this slot should always be empty.
• The data necessary for authentication is transferred with the application program to the target SD
card.
• Do not use an SD card if it has been used with a computer. Correct operation is not guaranteed if this
type of SD card is used.
Controller Options
49
To Next Page
Loading...
