Ricoh A-P4 - Fusing Unit Exit Guide; Hot Roller Strippers

Fusing Unit Exit Guide
1. Fusing unit (See ‘Fusing Unit Removal’.)
2. Exit guide [A]. Press the guide to the left and then press on the right end to release the peg
from the hole.
Hot Roller Strippers
1. Fusing unit (See ‘Fusing Unit Removal’.)
2. Fusing unit cover [A] ( x4)
• Note the positioning of the step screws x2 and the set screws x2.
Fusing Unit
113
3