SP5990>>
Print Mode
4. Push [#Enter].
SP5990-001
All Data List
5. Push to select "Diagnostic Report".
SP5990-005
Diagnostic Repor
6. Push [#Enter].
Diagnostic Repor ex-
ecute?
7. Push [#Enter] to print the pattern.
Diagnostic Repor
Processing…
8. You can repeat this procedure for as many test prints as you need.
• After you enter a Print Test Pattern number, the test pattern prints, and not the SMC Report. The
machine will remain in this mode until you leave the Service Mode, or turn the printer off and
on.
• After leaving the re-entering the Service Mode, or after turning the machine off and on, the SMC
Report feature is restored to normal operation.
SP2902-03 Printing Test Patterns
No. Test Pattern No. Test Pattern
0 *0:None 14 14:Black Band
1 1:Vert. Line 1 15 15:Ind. Pat. 4
2 2:Hori. Line 1 16 16:Hori. L1 Rev.
3 3:Vert. Line 2 17 17:Grid P1 Rev.
4 4:Hori. Line 2 18 18:Ind. P1 Rev.
5. Service Tables
262
To Next Page
Loading...
