When the paper tray is set into the machine, it pushes the release lever [E]. This causes the pick-up roller
[D] to go down and the separation roller [B] to move up and contact the paper feed roller.
Paper Lift
The paper size switch [1] detects when the paper tray [2] is set in the machine, and the tray lift motor [3]
rotates, and the coupling gear [4] on the tray lift motor engages the pin [5] on the lift arm shaft [6]. Then
the tray lift arm [7] lifts the tray bottom plate [8].
Paper Feed
337
To Next Page
Loading...
