Ricoh A-P4 - Using Debug Log; Setting Up Save Debug Log

DIP Switches
Controller: DIP SW2
DIP SW No. ON OFF
1 SD Card System ROM Boot
2
Keep at “OFF”3
4
I/O Board: DIP SW101
DIP SW No. Function ON OFF
1 Not used. Off (Do not change)
2
Jam Detection
(see Note)
Off On
3 SC Generation Disabled Enabled
4 Not used OFF (Do not change)
5 Not used OFF (Do not change)
6
7
Destination
OFF Japan
OFF
ON North America
OFF
OFF Europe
ON
ON Not used
ON
8
Software Down-
load
Software download from SD card
for the engine.
Normal position.
• Disabling jam detection is effective only for the main machine (not for the options).
5. Service Tables
290
5