1. Connector cover [A] ( x1)
2. Duplex connectors [B] ( x2)
3. Duplex support arm [C] ( x1)
4. Duplex unit [D]
• Grip the duplex unit with both hands, slowly rotate it towards you and then lift up.
Right Upper Cover
• Work carefully to avoid damaging the development roller.
1. Duplex unit (See ‘Duplex Unit’.)
2. Transfer belt unit (See ‘Transfer Unit – Transfer Belt Unit’)
3. Remove the right upper cover [A]
( x1)
Loop fastener
( x1)
( x1, Bushing x1)
3. Replacement and Adjustment
68
To Next Page
Loading...
