bit0 _
4. Select the “0” or “1” for each position. The leftmost digit is 7 and the rightmost is 0.
• Press or to move the cursor to the right or left to position the it at the digit to change.
• Press [#Enter] then press or to toggle the digit between “1” and “0”.
• With the digit for entry displayed on the second line, press [#Enter]. The selected digit is entered
into the position above.
• Repeat this procedure to set all the digits.
5. When you are finished, press [Escape] to return to the previous level. The new settings for
the bit switch are now stored.
Printer Controller Bit Switch Settings
Position: 7 6 5 4 3 2 1 0
Display: 0 0 0 0 0 0 0 0
Bit Switch 1 Default
Do not change these settings.
0 0
1 0
2 1
3 0
4 0
5 0
6 0
7 0
Bit Switch 2 All "0"
Bit Switch 3 All "0"
Bit Switch 4 All "0"
Service Program Mode Operation
183
To Next Page
Loading...
