Ricoh A-P4 - Page 295

<EngineSC Error>
ON
4. Push [#Enter].
<EngineSC Error>
*ON
5. Push [Esc].
SP5858-001
EngineSC Error
6. Repeat this procedure to select either 002 or 004.
- Example 2: To set an SC code with 003 -
This example shows you how to enter "672" for SC672.
• For details about SC code numbers, please refer to the SC tables in Section "4. Troubleshooting".
1. Select "SP5858-003".
SP5858-003
Any SC Code
2. Push [#Enter].
0000000
_
3. Push [#Enter] to toggle the on the number display in the 2nd line.
0000000
0
4. Push  or  to display "2".
0000000
2
5. Push [#Enter] to enter the "2" in the line above.
5. Service Tables
294
5