Stamp
129
2
F
FF
F
Change the stamp position, size
or density.
If you do not wish to make a
change, go to step
G
.
To change the stamp position,
size or density
A
AA
A
Press the [
Change
] key.
B
BB
B
Select the desired position,
size and density.
C
CC
C
Press the [
OK
] key.
Note
❒ To cancel the settings, press
the [
Cancel
] key.
G
GG
G
After you specify all the desired
settings, press the [
OK
] key.
H
HH
H
Press the [
OK
] key.
Note
❒ To cancel the settings, press the
[
Cancel
] key.
I
II
I
Place your originals, and then
press the
{
{{
{
Start
}
}}
}
key.
User Stamp
TheoptionalHDDand32MBof
memory are required to use this func-
tion (if the machine is equipped with
the Printer unit, 32 MB of memory is
not required).
Up to four messages which you use
frequentlycanbestoredinthema-
chine's memory and stamped on cop-
ies.
Preparation
Before using this function, you
have to store your messages with
the User Tools. ⇒ p.131 “Pro-
gram/Delete User Stamp”
Limitation
❒ You cannot use the bypass tray
with this function.
❒ Onlyonemessagecanbestamped
at a time.
Note
❒ You can change the print page
with the User Tools.
To Next Page
Loading...
