Transmission Features
60
4
C
CC
C
Select [Std. Message].
D
DD
D
Select the standard message to be
stamped.
Note
❒ Programmed standard messag-
es are shown in the keys. If there
are none programmed, the mes-
sage "*Not programed" is
shown.
❒ The machine cannot stamp mul-
tiple standard messages.
E
EE
E
Press [
OK
].
"Std. Message" is highlighted, and
the selected standard message is
shown.
F
FF
F
Press [
OK
].
The Sub Transmission Mode menu
is shown.
G
GG
G
Dial, and then press the {
{{
{Start}
}}
}
key.
Sending an Auto Document
If you often have to send a particular
page to people (for example a map, a
standard attachment or a set of in-
structions), store that page in the
memory as an Auto Document. This
saves rescanning the document every
time you want to send it.
You can fax an Auto Document by it-
self, or attach it to a normal fax message.
Preparation
You need to program an Auto Doc-
ument. ⇒ p.118 “Storing and
Changing an Auto Document”
Important
❒ Whenever you store or change an
Auto Document, we recommend
that you print the Auto Document
list for reference. ⇒ p.124 “Re-
ports/Lists”
Limitation
❒ You can attach one Auto Docu-
ment to each transmission.
Note
❒ You can store up to 6 Auto Docu-
ments (up to 18 with optional Ex-
pansion Memory installed).⇒
p.118 “Storing and Changing an
Auto Document”
❒ Files with Auto Documents are
scanned by Memory Transmission.
❒ When sending an Auto Document
with another file, the Auto Docu-
ment is scanned first.
❒
Storing Auto Documents reduces
the amount of free memory slightly.
Unless you delete the document,
free memory will not return to 100%.
❒ You can print an Auto Document
or a summary of Auto Documents
currently stored in memory. ⇒
p.124 “Reports/Lists”
RusC2FaxADEN-F_V4_FM.book Page 60 Monday, August 20, 2001 10:52 AM
To Next Page
Loading...
