25
3. Communication
Information
Printing the Journal
The Journal can be printed manually.
You can check the result of the last 50
communications (receptions+trans-
missions). It is printed automatically
after every 50 communications (re-
ceptions+transmissions).
If the machine is installed with the
optional ISDN Unit or the optional
Extra G3 Interface Unit, you can print
the Journal of each line type.
You can also print a copy of the Jour-
nal at any time by following the pro-
cedure below.
Important
❒ The contents of a Journal printed
automatically are deleted after
printing. If you administer the his-
tory of transmissions and recep-
tions, we recommend that you
keep the Journal. You can check a
total of 200 communications (re-
ceptions+transmissions) on the
display.
❖
❖❖
❖ All
Prints the results of communi-
cations in the order mode.
❖
❖❖
❖ Print per File No.
Prints only the results of com-
munications specified by file
number.
❖
❖❖
❖ Print per User Code
Prints only the results of com-
munications for a specified User
code.
⇒Chapter 1, "Reading the Dis-
play Panel and Using Keys" in
the Basic Features manual
Note
❒ The sender's name column of the
Journal is useful when you need to
program a special sender.
❒ You can set whether the Journal is
automatically printed after every
50 communications in "User Pa-
rameters". ⇒ p.141 “Changing the
User Parameters”(Switch03, Bit7)
❒ You can set whether you print the
Journal by line type. ⇒ p.141
“Changing the User Parame-
ters”(Switch19, Bit1)
A
AA
A
Press [Information].
B
BB
B
Select [Print Journal].
RusC2FaxADEN-F_V4_FM.book Page 25 Monday, August 20, 2001 10:52 AM
To Next Page
Loading...
