5
1. Basics
Connecting the Machine
Make sure that the shape and the position of the connector are as shown in the
illustration.
Note
❒ The Ethernet Board (for Ethernet interface) and the IEEE1394 Board (for
IEEE1394 interface) cannot be installed in the machine at the same time. The
illustration below shows all interface connectors for explanatory purposes
only.
1.
10BASE-T/100BASE-TX (option)
2.
Parallel port
3.
IEEE 1394 ports (option)
Reference
For more information about the parallel port and IEEE1394 interface connec-
tions, see "Connecting the Machine" in the Printer Reference.
2
3
1
ZFFH010E
RussianC2-EN-sysF1_V4_FM.book Page 5 Thursday, August 23, 2001 11:34 AM
To Next Page
Loading...
