Ricoh Aficio 1022 - Selecting the Reception Mode

Faxing
46
2
Reception
Selecting the Reception Mode
There are two ways you can set up
your machine to handle incoming
calls:
• Manual Reception (external tele-
phone required)
• Auto Reception (external tele-
phone required)
Manual Reception
When a telephone call comes in, the
machine rings. If the call is a fax mes-
sage, you must manually change to
facsimile mode.
Auto Reception
When a telephone call comes in, the
machine automatically receives it as a
fax message. Use this setting for a
dedicated fax line.
Limitation
❒ You cannot select the reception
mode when the Extra G3 Interface
Unit (option) is installed.
❒ The optional external telephone is
required to use this machine as a
telephone.
❒ You cannot select the reception
mode when you use an ISDN line.
-
--
-Receiving a Fax in Manual
Reception Mode
A
When the machine rings, pick up
the handset of the external tele-
phone.
B
If you hear beeps, press the {
{{
{Start}
}}
}
key or the {
{{
{Start Manual RX}
}}
} key.
(The {
{{
{Start}
}}
} key is available in the
facsimile mode when an original is
not placed only.)
C
Replace the handset of the external
telephone. The machine will start
receiving.