Printer Features Parameters
57
5
Host Interface
PCL Config. Page
Menu Description
I/O Buffer You can set the size of the I/O Buffer. Normally it is not necessary
to change this setting.
16 KB, 32 KB, 64 KB, 128 KB, 256 KB, 512 KB
Note
❒ Default: 32 KB
I/O Timeout You can set how many seconds the machine should wait before
ending a print job. If data from another port often arrives in the
middle of the print job, you should increase the timeout value.
10 seconds, 15 seconds, 20 seconds, 25 seconds, 60 seconds
Note
❒ Default: 15 seconds
Menu Description
Orientation You can set the page orientation.
• Portrait
• Landscape
Note
❒ Default: Portrait
Form Lines You can set the number of lines per page.
• 5-128
Note
❒ Default: 64 (Metric version), 60 (Inch version)
Font Source You can set the location of the default font.
• Resident
When downloading a font to the following devices, note that the
device names are also displayed:
• RAM
• HDD
Font Number You can set the ID of the default font you want to use.
• 0 to 50
Note
❒ Default: 0
To Next Page
Loading...
