Ricoh Aficio 1022 - Windows NT 4.0 - Installing the RPCS Printer Driver

Installing the Printer Driver and Software
28
2
B
BB
B
Click the icon of the machine you want to use. On the [File] menu, click
[
Properties
].
C
CC
C
Click the [Accessories] tab.
D
DD
D
Select options you have installed from the [Options] group.
E
EE
E
Click [OK] .
Windows NT 4.0 - Installing the RPCS™ Printer Driver
Installing the printer driver
Install the driver by using Auto Run. ⇒ p.22 “Installing by Auto Run”
Note
❒ When prompted for the Windows 95/98/Me alternate printer driver loca-
tion, select the following folder on the CD-ROM.
• \DRIVERS\RPCS\WIN9X_ME\(Language)\DISK1\
Setting up options
Setting up options is necessary when bidirectional transmissions are not en-
abled. In this case, follow the procedures below. For information about bidirec-
tional transmissions, see p.29 “The conditions of the bidirectional
transmissions”.
Limitation
❒ Changing the setting of the machine requires Full Control access permission.
Members of the Administrators, Server Operators, Print Operators, and Pow-
er Users groups have Full Control permission by default. When you set up
options, log on using an account that has Full Control permission.
Important
❒ If the machine is equipped with certain options (e.g. the Large Capacity Tray
(LCT) or the finisher), you should set up the options with the printer driver.
❒ You must set the correct paper size and feed direction that match the tray set-
tings on the printer driver.
Note
❒ When setting up options, you should access the [Printer Properties] dialog box
from Windows. You cannot set up options by accessing the [
Printer Properties
]
dialog box from an application.
RussianC2-EN-PrREF1_V4_FM.book Page 28 Wednesday, August 8, 2001 3:52 PM