Setup
58
3
Editing Quick Dials
Change the destination information
already programmed. Use this proce-
dure to cancel a transmission after the
original has been scanned.
Limitation
❒ When a programmed Quick Dial
key is being used for a standby
Memory Transmission, the mes-
sage "Specified destination is used
by transmission standby file. It
cannot be changed or deleted.
Specify it again after transmission
is completed." is shown. You can-
not change the destination for this
key at this time.
Note
❒ You also can change the destina-
tion information in "Program/De-
lete Menu" in "The Facsimile
Features".
A
AA
A
Press [Dest. Management].
B
BB
B
Select [Program/Change/Delete Quick
Dial].
C
CC
C
Select the destination key you
want to change.
Note
❒ If the destination key you re-
quire is not shown, press [U
UU
U
Prev.] or [T
TT
T Next].
❒ Press [Change Title] to display
another title.
D
DD
D
Edit the items you want to change.
Editing a Facsimile Number
A
AA
A Press the {
{{
{Clear/Stop}
}}
} key or
[Clear] and reenter the facsimile
number.
Note
❒
Press [
Adv. Features
] to edit F code,
sub-address or UUI. ⇒ Chapter 4,
"Advanced Features" in the Ad-
vanced Features manual
❒ You can select a line type for
each destination when the
ISDN Unit (option) or Extra G3
Interface Unit (option) is in-
stalled. Press [
Select Line
] to se-
lect a line type. ⇒ Chapter 4,
"Changing the Line Type" in
the Advanced Features manual
To Next Page
Loading...
