Specifications
63
6
Specifications
This section contains the electrical and hardware specifications for the machine
including information about the options.
*1
Only 600 dpi can be specified from the printer driver.
*2
To use NetBEUI, use the SmartNetMoniter for Client port.
Component Specification
Resolution • PCL 5e: 300 dpi, 600 dpi
• PCL 6: 600 dpi
• PostScript 3: 300 dpi, 600 dpi
*1
• RPCS™: 600 dpi
Printing Speed 22ppm, 27ppm
(A4K, 8/" × 11"K)
Note
❒ Printing Speed depends on the machine. Check which type of
machine you have.
Parallel Interface Standard 36-pin printer cable and a parallel port on the host com-
puter.
IEEE1284
Note
❒ Do not use a parallel cable that is longer than 3 meters (10 feet).
Printer Language PCL 5e , PCL 6, RPCS™
PostScript 3 (option)
Fonts
PCL 5e, PCL 6
Afga Font Manager 35 Intellifonts, 10 TrueType fonts, and 1 Bit-
map font Font Manager available.
PostScript 3
136 fonts (Type 2:24, Type 14:112)
Memory Standard : 32MB
Optional SDRAM :
64MB
Note
❒ Using the printer function requires at least 64 MB of memory
(option).
Hard Disk
Storage capacity :
6 GB or more
Operation Systems sup-
ported by this machine
Windows 95/98/Me
Windows 2000
Windows NT 4.0
Mac OS 8.6 to 9.1
Network
Topology :
Ethernet 10BASE-T/100BASE-TX
Protocol :
TCP/IP, IPX/SPX, NetBEUI
*2
, AppleTalk
Network Cable 10BASE-T/100BASE-TX shielded twisted-pair (STP, Catego-
ry/Type5) cable.
To Next Page
Loading...
