Appendix
62
6
❖
❖❖
❖ When the finisher is Finisher 500:
• If the output tray specified for the interrupting job is the Finisher Tray,
the interrupting job will be delivered to Internal Tray 1.
• If the output tray specified for the interrupting job is not the Finisher
Tray, the interrupting job will be delivered to the specified output tray.
❖
❖❖
❖ When the finisher is Finisher 1000:
• If the output tray specified for the interrupting job is the Finisher Shift
Tray, the interrupting job will be delivered to the Finisher Proof Tray.
• If the output tray specified for the interrupting job is not the Finisher
Shift Tray, the interrupting job will be delivered to the specified output
tray.
❒ When a finisher is mounted and stapling is specified for a job, the job will be
delivered to the Finisher Shift Tray regardless of the output tray specified.
Note
❒ If you cannot make staple settings even with a finisher mounted, options may
not be set up correctly on the printer driver. Correct option settings in [Change
Option Configuration: Paper Tray Settings]" on the printer driver. For details, see
the Help of the printer driver.
❒ When duplex printing is specified, adjust staple positions to the binding di-
rection.
❒ When the finisher is being used for a job of another function ( for example., a
copy job), printing will start after the current job ends.
To Next Page
Loading...
