61
6. Appendix
Staple
The following tables show the staple positions.
Note
❒ Staple outputs depend on paper size, paper type, number of pages and feed
direction.
Reference
• For the paper sizes and maximum numbers of sheets available for stapling,
see "Staple" in the Copier Reference.
• For the printing method, see the Help of the printer driver.
Limitation
❒ Stapling can be done only with a finisher installed on the machine.
❒ Stapling cannot be done when paper is fed from the optional Bypass Tray.
❒ Thick paper, OHP transparencies, and thin paper cannot be stapled.
❒ You cannot interrupt the current job with a job of another function for which
stapling or sorting is specified.
❒ You can interrupt the current job with an ordinary copy job or facsimile re-
ception. The output tray for the interrupting job varies depending on the fin-
isher type and output tray specification for the interrupting job.
Paper orientation
on the machine
Print data
direction
Staple position
Vertical
Horizontal
Finisher 500
Finisher 1000
Vertical
Horizontal
To Next Page
Loading...
