Ricoh Aficio 1022 - If the Machine Cannot Detect the Size of Your Original

Placing Originals
23
2
If the Machine Cannot Detect the Size of Your Original
If the machine cannot detect the original size, the following display is shown:
If this happens, carry out the following steps.
A
AA
A
Press [Exit].
B
BB
B
Remove the original and replace it on the exposure glass.
C
CC
C
Press the {
{{
{Start}
}}
} key to scan the original again.
If the above display appears again, repeat steps A to C.
Note
❒ If the machine still cannot detect the original size, the following display is
shown:
❒ If this happens, carry out the following steps.
• Press the key to switch the scan size.
• Press the {
{{
{Start}
}}
} key again.