Ricoh Aficio 1022 - Advanced Features; SUB Code

Advanced Features
43
4
Advanced Features
SUB Code
You can use Confidential Transmis-
sion to send messages to fax machines
of other makes that support the SUB
Code communication feature.⇒ p.7
“Confidential Transmission” You can
also use Transfer Request Transmis-
sion to send messages to fax machines
of other makes that support the
Transfer Station feature. When using
SUB code, your machine can only
safely communicate with other ma-
chines that support SUB Code.
Limitation
❒ You can only use this feature with
a G3 or I-G3 line (not with G4).
❒ You cannot use Chain Dial with
this feature. ⇒ p.41 “Chain Dial”
❒ You cannot select the SUB Code
function when carrying out stand-
ard Confidential Transmission.
Note
❒
The ID can be up to 20 digits long and
consist of numbers, spaces, * and # .
❒ Make sure the number of digits in
the ID matches the specification of
the machine to which you are
sending.
❒ You can store not only destination
names and fax numbers but also
SUB Codes in Quick Dials, Groups
and Programs. Digits, spaces, *
and # can be stored. ⇒Chapter 3,
"Quick Dials" in the Basic Features
manual, Chapter 3, "Groups" in the
Basic Features manual,⇒ p.97
“Registering Keystroke Programs”
❒ Messages you send using this fea-
ture are marked "SUB" on all re-
ports.⇒ p.124 “Reports/Lists”
A
AA
A
Place your original, and then se-
lect any scan settings you require.
B
BB
B
Dial the fax number using the
number keys.
C
CC
C
Press [Adv. Features].
The advanced feature menu is
shown.
D
DD
D
Select [SUB Code].
E
EE
E
Press [TX SUB Code].
RusC2FaxADEN-F_V4_FM.book Page 43 Monday, August 20, 2001 10:52 AM