Ricoh Aficio 1022 - Using the Network Delivery Scanner with the Document Server; Simultaneous Delivery and Storage

Delivering Stored Scan Data by the Network Delivery Scanner
50
5
Using the Network Delivery Scanner with
the Document Server
You can use the network delivery
scanner with the Document Server.
Simultaneous Delivery and
Storage
Scanned data is stored in the Docu-
ment Server when the data is deliv-
ered.
Note
❒ This section explains mainly the op-
eration for simultaneous delivery
and storage. For more information,
see p.45 “Delivery Procedure”.
A
Place the original and adjust the
settings for original size and ori-
entation if required.
Reference
⇒ p.33 “Setting Originals”
B
Make the scan settings.
C
Select the destination.
D
If required, specify the sender
(scan data delivery source) and a
subject.
E
Press [Store File].
The screen for setting Store File ap-
pears.
F
Make sure [Store & Transmit] to be
selected.
G
Press [File Information] to set file in-
formation.
Reference
For more information, see p.55
“Specifying file information”.
H
Press [OK].
I
Press the {Start} key.
The original is scanned, and the
file is delivered to the destination
and stored in the Document Serv-
er.