Error & Status Messages on the Display Panel
41
4
Machine configuration
You can check the machine configuration using telnet.
❖
❖❖
❖ telnet
Use the info command.
❖
❖❖
❖ UNIX
Use the lpr or lpstat command or stat parameter of rsh, rcp, or ftp.
Reference
For more information, see “Remote Maintenance by Telnet (mshell)” in the
Network Printing Guide Operating Instructions provided as a PDF file on
the CD-ROM labeled “Operating Instructions for Printer”.
Note
❒ “*” (asterisk) is displayed with the current setting.
❒ Regarding *1–*5, see table below.
❖
❖❖
❖ *1 Input Tray: Name
Item Description
Input Tray
No.
Name
PaperSize
Status
ID number of the paper tray
Name of the paper tray
*1
Paper size loaded in the paper tray
*2
Current status of the paper tray
*3
Output Tray
No.
Name
Status
ID number of the output tray
Name of the output tray
*4
Current status of the output tray
*5
Name Description
Tray X Name of installed paper tray. (X is the number
of tray.)
Tray 3 (LCT) Large Capacity Tray (LCT)
Bypass Tray Bypass tray
To Next Page
Loading...
