Ricoh Aficio 1022 - Installing the RPCS Printer Driver; Windows 95;98;Me - Installing the RPCS Printer Driver

Installing the Printer Driver and Software
26
2
Installing the RPCS™ Printer Driver
Important
❒ When updating the printer driver by installing the latest version, you should
uninstall the former version . See “Uninstalling the Printer Driver and Software”
in the Printer Controller Type 1027 Printer Reference 2.
Windows 95/98/Me - Installing the RPCS™ Printer Driver
Installing the printer driver
Install the driver by using Auto Run. ⇒ p.22 “Installing by Auto Run”
Setting up options
Setting up options is necessary when bidirectional transmissions are not en-
abled. In this case, follow the procedures below. For information about bidirec-
tional transmissions, see p.29 “The conditions of the bidirectional
transmissions”.
Important
❒ If the machine is equipped with certain options (e.g. the Large Capacity Tray
(LCT) or the finisher), you should set up the options with the printer driver.
❒ You must set the correct paper size and feed direction that match the tray set-
tings on the printer driver.
Note
❒ When setting up options, you should access the [Printer Properties] dialog box
from Windows. You cannot set up options by accessing the [Printer Properties]
dialog box from an application.
A
AA
A
Click [Start] on the taskbar, point to [Settings], and then click [Printers].
The [Printers] window appears.
B
BB
B
Click the icon of the machine you want to use. On the [File] menu, click
[Properties].
C
CC
C
Click the [Print Settings] tab.
D
DD
D
Click [Printer Configuration...].
E
EE
E
Click [Change Accessories...].
F
FF
F
Select options you have installed from the [Select printer options:] box.
RussianC2-EN-PrREF1_V4_FM.book Page 26 Wednesday, August 8, 2001 3:52 PM