Transmission Features
44
4
F
FF
F
Enter a SUB Code with the number
keys.
You can store not only destination
names and fax numbers but also
SUB Codes in Quick Dials, Groups
and Programs. Digits, spaces, *
and # can be stored. ⇒Chapter 3,
"Quick Dials" in the Basic Features
manual, Chapter 3, "Groups" in the
Basic Features manual, ⇒ p.97
“Registering Keystroke Programs”
G
GG
G
Press [OK].
SUB Code appears one line under
the fax number on the display.
H
HH
H
Press [Exit].
To enter a password, press [Pass-
word (SID)].
I
II
I
Press the {
{{
{Start}
}}
} key.
Note
❒ If you use Immediate Transmis-
sion and the destination fax ma-
chine does not support the SUB
Code feature, a message will ap-
pear on the display to inform
you of this. In this case, press
[OK] to cancel the transmission.
SID Code
There are times when you may wish
to use a "SID" (Sender ID) when send-
ing confidential faxes with the SUB
Code feature.
If a password is set in a Transfer Box
with a SUB Code, you should also en-
ter a SID Code as a password.
Limitation
❒ You can enter a SID using up to 20
digits .
Note
❒ Messages you send using this fea-
ture are marked "SID" on all re-
ports.⇒ p.124 “Reports/Lists”
Reference
Chapter 3, "Quick Dials" in the Ba-
sic Features manual
Chapter 3, "Groups" in the Basic
Features manual
RusC2FaxADEN-F_V4_FM.book Page 44 Monday, August 20, 2001 10:52 AM
To Next Page
Loading...
