Ricoh Aficio 1022 - Programming and Changing a Scan Size

Program/Delete Menu
121
7
Programming and Changing a
Scan Size
When you select a Scan Size to scan a
non-standard size original, two cus-
tom sizes of original are available
(Program Size 1 and Program Size 2).
Use the following procedure to pro-
gram a custom size in advance.
To change an existing Scan Size, use
the same procedure.
Important
❒ When programming or changing a
Scan Size, we recommend that you
make a memo of the new size.
Note
❒ Use the same procedure to pro-
gram and change a Scan Size. Fol-
low the procedure for the items
you want to change.
❒ You can specify a horizontal length
from 128 to 1200mm or from 5.5 to
47inches.
A
AA
A
Press the {
{{
{User Tools/Counter}
}}
} key.
B
BB
B
Select [Facsimile Features].
The Facsimile Features menu is
shown.
C
CC
C
Check that the "Prog./Change/De-
lete" tab is shown.
D
DD
D
Select [Program/Change/Delete Scan
Size].
E
EE
E
After confirming [Register/Change]
is selected, press [Program Size 1] or
[Program Size 2].
Note
❒ If [Register/Change] is not select-
ed, press [Register/Change].
❒ If a size is already programmed,
it is shown on the display. If not,
"*Not programed" is shown.
F
FF
F
Enter a horizontal size with the
number keys.
RusC2FaxADEN-F_V4_FM.book Page 121 Monday, August 20, 2001 10:52 AM