Transmission Features
78
4
Communication Failure Report
This report is only printed if the
Transmission Result Report is turned
off and a message could not be suc-
cessfully transmitted with Memory
Transmission. Use it to keep a record
of failed transmissions so you can
send them again.
Note
❒ You can choose whether to include
part of the original image on the re-
port. ⇒ p.141 “Changing the User
Parameters”(Switch04, Bit7)
❒ The "Page" column gives the total
number of pages. The "Not Sent"
column gives the number of pages
that could not be sent successfully.
Transmission Result Report
(Immediate Transmission)
If you turn this report on, a report will
be printed after every Immediate
Transmission so you have a record of
whether the transmission was suc-
cessful or not. If the machine is set up
not to print this report and the fax
message could not be successfully
transmitted, the Error report is print-
ed instead.
Note
❒ You can switch this report on or off
using the User Parameters. ⇒
p.141 “Changing the User Parame-
ters”(Switch03, Bit5)
❒ If the page was sent successfully,
the "Page" column gives the total
number of pages that was sent suc-
cessfully. The "Not Sent" column
gives the number of pages that
could not be sent successfully.
RusC2FaxADEN-F_V4_FM.book Page 78 Monday, August 20, 2001 10:52 AM
To Next Page
Loading...
