Ricoh Aficio 1022 - Deleting a Scan Size

Facsimile Features
122
7
Note
❒ You can specify a horizontal
length from 128 to 1200mm or
from 5.5 to 47 inches. You can-
not specify a length shorter than
128mm or longer than 1200mm.
❒
Each time you press
[mm]
or
[inch]
,
the units change between "mm"
and "inch" alternately. If you enter
a length and change the unit by
pressing
[mm]
or
[inch]
, the length
is converted automatically accord-
ing to the unit (fractions are
rounded off). For Example, When
you enter
{
{{
{
2
}
}}
}
,
{
{{
{
5
}
}}
}
and
{
{{
{
0
}
}}
}
in mil-
limeters and change to "inch", the
length "9.8inch" is shown on the
display. If you press "mm" again,
"249mm" is displayed.
❒ If you make a mistake, press
[Clear] and try again.
❒ To cancel a Scan Size, press
[Cancel].
G
GG
G
Select a vertical size.
Note
❒ A displayed vertical size differs
depending on the selected unit.
When [mm] is selected, [Auto de-
tect], [210mm (A4)], [257mm(B4
JIS)], [297mm (A3)], [216mm (8 1/2)]
and [279mm (11)] are shown.
When [inch] is selected, [Auto de-
tect], [8.3inch (A4)], [10.1inch(B4
JIS)], [11.7inch (A3)], [8.5inch] and
[11.0inch] are shown.
❒ To cancel a Scan Size, press
[Cancel].
H
HH
H
Press [OK].
A programmed size is displayed. If
you set the size to [Auto Detect],
"Auto" is displayed.
I
II
I
Press [Exit].
J
JJ
J
Press the {
{{
{User Tools/Counter}
}}
} key.
The initial display is shown.
Deleting a Scan Size
A
AA
A
Press the {
{{
{User Tools/Counter}
}}
} key.
B
BB
B
Select [Facsimile Features].
The Facsimile Features menu is
shown.
C
CC
C
Check that the "Prog./Change/De-
lete" tab is shown.
D
DD
D
Select [Program/Change/Delete Scan
Size].
Programmed contents are dis-
played.
RusC2FaxADEN-F_V4_FM.book Page 122 Monday, August 20, 2001 10:52 AM