Ricoh Aficio 1022 - Reading the Display; Reading the Display Panel and Using Keys

Getting Started
12
1
Reading the Display
The display tells you the machine status and guides you through operations.
Note
❒ Functions that have been selected are highlighted (for example ).
Keys that you cannot select are shown with a dashed outline (for example
).
❒ All procedures in this manual assume you are in Facsimile mode. By default,
when you turn the machine on, it is in Copy mode. Press the {
{{
{Facsimile}
}}
} key
to change to Facsimile mode. You can have the machine start in Facsimile
mode. ⇒ "Changing the Machine's Settings" in the Copy Reference
Reading the Display Panel and Using Keys
Note
❒ When optional components are not installed, the display is as below. If op-
tional components are installed, the display changes.
❖
❖❖
❖ Facsimile standby mode
A
Displays the scanning conditions and sizes you can choose.
B
Displays the name and facsimile number of a destination when transmitting.
Also displays the size of the original.
C
Displays the entered number of a destination. When adding destinations with
the number keys, press [Add].
D
Displays messages and the machine status.
E
Press to display various information about transmission.