Ricoh Aficio 1022 - Windows 2000 - Installing the RPCS Printer Driver

Installing the RPCS™ Printer Driver
27
2
G
GG
G
Make the settings and click [OK].
H
HH
H
Click [OK] to close the [Printer Configuration] dialog box.
I
II
I
Click [OK] to start printing.
Windows 2000 - Installing the RPCS™ Printer Driver
Installing the printer driver
Install the driver by using Auto Run. ⇒ p.22 “Installing by Auto Run”
Note
❒ During installation, the [
Digital Signature Not Found
] dialog box may appear.
Click [Yes] to continue the installation.
❒ When prompted for the Windows 95/98/Me alternate driver location, select
the following folder on the CD-ROM.
• \DRIVERS\RPCS\WIN9X_ME\(Language)\DISK1\
Setting up options
Setting up options is necessary when bidirectional transmissions are not en-
abled. In this case, follow the procedures below. For information about bidirec-
tional transmissions, see p.29 “The conditions of the bidirectional
transmissions”.
Limitation
❒ Changing the machine settings requires Manage Printers permission. Mem-
bers of the Administrators and Power Users groups have Manage Printers
permission by default. When you set up options, log on using an account that
has Manage Printers permission.
Important
❒ If the machine is equipped with certain options (e.g. the Large Capacity Tray
(LCT) or the finisher), you should set up the options with the printer driver.
❒ You must set the correct paper size and feed direction that match the tray set-
tings on the printer driver.
Note
❒ When setting up options, you should access the [
Printer Properties
] dialog box
from Windows. You cannot set up options by accessing the [
Printer Properties
]
dialog box from an application.
A
AA
A
Click [
Start
] on the taskbar, point to [
Settings
], and then click [
Printers
].
The [Printers] window appears.
RussianC2-EN-PrREF1_V4_FM.book Page 27 Wednesday, August 8, 2001 3:52 PM