Installing the RPCS™ Printer Driver
29
2
A
AA
A
Click [Start] on the taskbar, point to [Settings], and then click [Printers].
The [
Printers
] window appears.
B
BB
B
Click the icon of the machine you want to use. On the [File] menu, click
[Properties].
C
CC
C
Click the [
Change Accessories
] tab.
D
DD
D
Select options you have installed from the [Select Printer Options:] box.
E
EE
E
Click [OK] .
-
--
-The conditions of the bidirectional transmissions
When bidirectional transmissions are enabled, the information about the paper
size and feed direction settings are automatically sent to the machine by the
computer. You can also check the machine's status from your computer.
• Bidirectional transmissions are supported by Windows 95/98/Me, Windows
2000 and Windows NT 4.0.
• When the bidirectional transmission is working, the machine status and in-
formation are obtained when opening the printer driver screen.
To support the bidirectional transmissions, the following conditions below are
required.
❖
❖❖
❖ When connecting with a parallel cable
• The computer must support the bidirectional transmissions.
• The Interface cable must support the bidirectional transmissions.
• The machine must be connected to the computer using the standard paral-
lel cable and the parallel connector.
• On Windows 95/98/Me, [Enable bi-directional support for this printer] must be
selected in [Spool Settings…] on the [Details] tab.
• On Windows 2000 and Windows NT 4.0, [Enable bi-directional support] must
be selected and [
Enable printer spooling
] must not be selected on the [
port
]
tab.
❖
❖❖
❖ When connecting with the network
• SmartNetMonitor for Admin or SmartNetMonitor for Client included on
the CD-ROM must be installed, and the TCP/IP protocol must be used.
RussianC2-EN-PrREF1_V4_FM.book Page 29 Wednesday, August 8, 2001 3:52 PM
To Next Page
Loading...
