6
10. Remove Paper Indicator
The indicator is lit when paper is output
to the internal tray 2 (1 bin tray). When
paper is removed from the internal tray 2,
the indicator goes off.
Note
❒ Internal tray 2 (1 bin tray) is optional.
11. Duplex unit (Unit for two-sided
copies) (option)
Makes two-sided copies.
12. Front cover
Open to access the inside of the machine.
13. Paper tray
Load paper here. ⇒ p.160 “
B
Loading
Paper”
14. Paper tray 2
Use when copying onto OHP transparen-
cies, label paper (adhesive labels), trans-
lucent paper, postcards, envelopes and
non-standard size paper. ⇒ p.57 “Copy-
ingfromthePaperTray2”
15. Paper tray unit (option)
Load paper here. ⇒ p.160 “
B
Loading
Paper”
1. Bypass tray (option)
Use when copying onto OHP transparen-
cies, label paper (adhesive labels), trans-
lucent paper, postcards, envelopes and
non-standard size paper. ⇒ p.61 “Copy-
ing from the Bypass Tray”
2. Paper tray cover
Open this cover to remove jammed pa-
per.
3. Lower right cover
Open this cover to remove jammed pa-
per.
To Next Page
Loading...
