Ricoh Aficio 1022 - Page 274

Configuring the Network
15
1
E
EE
E
Click [Effective Protocol].
Note
❒ Consult the network administrator for help with these settings.
❒ You must configure IP Address for using TCP/IP protocol. You don't have
to configure it if Networkboot is DHCP.
❒ Press [Invalid] for protocols that you don't use.
❒ Press [Effective] for TCP/IP protocol when you use pure IP of NetWare
5/5.1.
Limitation
❒ You need to have PostScript 3 module for AppleTalk.
A
AA
A Make sure that the [Effective Protocol] key is pressed.
B
BB
B Select [Invalid] or [Effective] for each protocol.
C
CC
C Press [OK].
The following operation will be different, according to each protocol.
When Using TCP/IP
A
AA
A Make sure that the [Network] key is pressed.
B
BB
B Press [IP Address].
RussianC2-EN-sysF1_V4_FM.book Page 15 Thursday, August 23, 2001 11:34 AM