User Tools (System Settings)
74
4
B
BB
B
Press the [Vertical] or [Horizontal] key to specify the vertical or horizontal size,
respectively. Then enter the size with the number keys, and then click the
[#] key.
Note
❒ To correct the entered value, click the [Clear] key, and then enter the correct
value.
C
CC
C
Click [OK].
The specified custom size is then set and the "Tray Paper Size" display ap-
pears.
Paper Size Settings
2
/
3
❖
❖❖
❖ Paper Type (Bypass Tray)
Sets the display so you can see what type of paper is loaded in the bypass tray.
❖
❖❖
❖ The paper types you can set for the bypass tray are as follows:
• Plain paper, Recycled paper, Special paper, Color paper, Letterhead,
OHP, Label paper, Thick Paper, Thin paper
Note
❒ Default: No display
❖
❖❖
❖ Paper Type (Tray1–4)
Sets the display so you can see what type of paper is loaded in each of the pa-
per trays. This information is used by the print function to automatically se-
lect the paper tray.
❖
❖❖
❖ The paper types you can set for trays 1, 3 and 4 are as follows:
• Plain paper, Recycled paper, Special paper, Color paper, Letterhead
RussianC2-EN-sysF1_V4_FM.book Page 74 Thursday, August 23, 2001 11:34 AM
To Next Page
Loading...
