User Tools (System Settings)
80
4
❖
❖❖
❖ Network Boot
Select how to set an IP address from a client.
Note
❒ Default: NONE
❒ For details about settings, consult your network administrator.
❖
❖❖
❖ Effective Protocol
Select the protocol, to use in the network.
Note
❒ Default: TCP/IP:Effective, NetWare:Effective, NetBEUI:Effective, AppleTalk:
Effective
❖
❖❖
❖ NW Frame Type
Select the frame type when you use NetWare.
Note
❒ Default: Auto select
❖
❖❖
❖ Ethernet Speed
Set the access speed for networks.
Select a speed that matches your network environment. "Auto Select" should
usually be specified.
Note
❒ Default: Auto select
Address for access mask Client Address
000.000.000.000 xxx.xxx.xxx.xxx
255.000.000.000 192.xxx.xxx.xxx
255.255.000.000 192.168.xxx.xxx
255.255.255.000 192.168.15.xxx
255.255.255.255 192.168.15.16
RussianC2-EN-sysF1_V4_FM.book Page 80 Thursday, August 23, 2001 11:34 AM
To Next Page
Loading...
