Machine Does Not Print
45
4
Note
❒ If you cannot solve the problem by taking the preceding actions, contact your
sales or service representative.
Possible Cause Solutions
Is the Data In indicator
blinking or lit after starting
the print job?
If not blinking or lit, the data is not being sent to the machine.
❖
❖❖
❖ If the machine is connected to the computer using the
interface cable
Make sure the computer port settings are correct. For a parallel
port connection, port LPT1 or LPT2 should be set.
•
Windows 95/98/Me
A
Click [Start], point to [Settings] and then click [Printers].
B
Click to select the icon of the machine. Next, on the [File]
menu, click [Properties].
C
Click the [Details] tab.
D
Check the [Print to the following port] box to make sure that
the correct port is selected.
•
Windows 2000
A
Click [Start], point to [Settings] and then click [Printers].
B
Click to select the icon of the machine. Next, on the [File]
menu, click [Properties].
C
Click the [Port] tab.
D
Check the [Print to the following port] box to make sure that
the correct port is selected.
• Windows NT 4.0
A
Click [Start], point to [Settings] and then click [Printers].
B
Click to select the icon of the machine. Next, on the [File]
menu, click [Properties].
C
Click the [Port] tab.
D
Check the [Print to the following port] box to make sure that
the correct port is selected.
❖
❖❖
❖ Network Connection
Contact your network administrator.
To Next Page
Loading...
