Ricoh Aficio 1022 - Page 638

Setup
56
3
Note
❒ You should program a facsimile
number.
❒ If you make a mistake, press
[Clear] and start again.
❒ Press [Adv. Features] to edit F
code, sub-address or UUI. ⇒
Chapter 4, "Advanced Features"
in the Advanced Features man-
ual.
❒ You can select a line type for
each destination when the ISDN
Unit (option) or Extra G3 Inter-
face Unit (option) is installed.
Press [Select Line] to select a line
type. ⇒ Chapter 4, "Changing
the Line Type" in the Advanced
Features manual
Programming/Changing Key
Display
A
AA
A Press [Key Display].
B
BB
B Enter a Key Display.
Note
❒ The name which you pro-
grammed is shown. ⇒ p.72
“Entering Text”
C
CC
C Press [OK].
The Key Display which you
programmed is shown.
Selecting a Title
A
AA
A Press [Select Title].
B
BB
B Select the title you want to pro-
gram.
Note
❒ You can program the same
destination in [Title 1] , [Title 2]
and [Title 3].
❒ When [Freq.] is selected for
one title, [Freq.] is selected for
all titles. ⇒ Chapter 7, "Pro-
gram/Delete Menu" in the
Advanced Features manual
C
CC
C Press [OK].
Selecting a Fax Header
A
AA
A Press [Select Fax Header].
B
BB
B Select [1st Name] or [2nd Name]
for registration.
C
CC
C Press [OK].