Ricoh Aficio 1022 - Page 647

Groups
65
3
H
HH
H
Press [Exit].
I
II
I
Press [Exit].
The machine will return to standby
mode.
-
--
-Programming the Group as a
Transfer Station of a Multi-Step
Transfer
A Group can be programmed as a
Transfer Station of a Multi-Step
Transfer. You should program the re-
ceiving stations when you program
the group as a Transfer Station.
For more information, contact your
service representative.
Limitation
❒ If you want to program a group
which has been programmed as a
Transfer Station as a normal
group, delete the group and pro-
gram again.
❒ Only one group can be pro-
grammed as a Transfer Station.
A
Follow step A to F in "Program-
ming Groups".
B
Press [Adv. Features].
C
Press [Transfer Req.].
D
Press [Receiving Station].
E
Specify the receiving station.
Note
❒ When you specify the receiving
station with Quick Dial, press
[Quick Dial] and enter the Group
Dial number using the number
keys.
❒ When you specify the receiving
station with Group Dial, press
[Group Dial] and enter the Group
Dial number using the number
keys.
F
After specifying all of the receiving
stations, press [OK].
G
Press [OK].
H
Press [Exit] twice.
Reference
⇒ Chapter 5, “Reception Func-
tions” in the Advanced Features
manual