Transmission Features
70
4
Important
❒ If you turn this feature off, the
scale of the original is maintained
and some parts of the image may
be deleted when printed at the oth-
er end.
Note
❒ You can switch this feature on and
off in "General Setting/Adjust-
ment" (⇒ p.125).
-
--
-Default ID Transmission
When this feature is set to "ON",
transmission will only take place if
the destination's Polling ID is the
same as yours. This feature can stop
you from accidentally sending infor-
mation to the wrong place (you need
to co-ordinate Polling ID's with the
other party). When this feature is set
to "OFF", "Default ID Transmission" is
canceled.
Selecting Transmission Options for a
Single Transmission
A
AA
A
Place the original, and then select
any scan settings you require.
B
BB
B
Press [Sub TX Mode].
The Sub Transmission Mode menu
is shown.
C
CC
C
Select [Options].
D
DD
D
Press [ON] or [OFF] to specify "Fax
Header Print".
Note
❒ To close option settings, go to
step
J
.
RusC2FaxADEN-F_V4_FM.book Page 70 Monday, August 20, 2001 10:52 AM
To Next Page
Loading...
