Function List
203
11
Box Setting By using SUB and SEP Codes
with these functions, you can
send messages to another par-
ty's box and retrieve messages
stored in boxes.
⇒ p.155 “Box Settings”
Transfer Report Before using Transfer Re-
quest, you need this Transfer
Report setting.
⇒ p.167 “Transfer Report”
Program Confidential ID Register an ID required for
Confidential communication.
⇒ p.169 “Programming a
Confidential ID”
Program Polling ID Register an ID required for
Polling communication.
⇒ p.170 “Programming a
Polling ID”
Program Memory Lock ID Register an ID required for
Memory Lock reception.
⇒ p.171 “Programming a
Memory Lock ID”
Select Dial/Push Phone Select a Line type when you
connect the machine to a G3
analog line.
⇒ p.172 “Selecting Dial/Push
Phone”
Program ISDN-G3 Line Program Own Fax Numbers,
and sub-addresses when you
connect the machine to ISDN.
⇒ p.173 “Programming ISDN
G3 Line”
Program ISDN-G4 Line Program your own fax
number, TID (Terminal ID)
and sub-address when you
connect the machine to a G4
digital line.
⇒ p.174 “Programming ISDN
G4 Line”
Feature name Description Reference
RusC2FaxADEN-F_V4_FM.book Page 203 Monday, August 20, 2001 10:52 AM
To Next Page
Loading...
