COPIER INSTALLATION
SM 3-7 B089/B093
Installation
3.2.4 INSTALLATION PROCEDURE
CAUTION
Unplug the machine power cord before starting the following procedure.
If the optional paper tray or the optional LCT is going to be installed now, put the
copier on the paper tray unit or the LCT first, then install these options, then install
the copier.
NOTE: Keep the shipping retainers after installing the machine. They will be
reused if the machine is moved to another location in the future.
1. Remove the tapes and the shipping retainer [A] on the exterior of the copier.
2. Install the end fence [B].
B089I101.WMF
B089I502.WMF
B089I501.WMF
[A]
[B]
To Next Page
Loading...
