COPIER INSTALLATION
B089/B093 3-10 SM
14. If the optional bridge unit will not be installed: Swing the sensor feeler [A]
out.
15. Install the optional ARDF or the optional platen cover (see ARDF Installation or
Platen Cover Installation).
16. Plug in the machine and turn the main power switch on. The machine
automatically performs TD sensor initial setting (approximately 15 seconds).
17. Check the copy quality and copying functions.
HDD Caution Decal (for only –17, -57 models)
18. When installing the optional HDD, attach the HDD caution decal [B] to the front
cover.
B089I105.WMF
B089I155.WMF
[A]
[B]
To Next Page
Loading...
