COPIER INSTALLATION
SM 3-9 B089/B093
Installation
11. Attach the appropriate emblem [A] to the front cover if the emblem is not
attached to the front cover.
12. Pull the paper tray out and turn the paper size dial to select the appropriate
size. Adjust the side guides and end guide to match the paper size.
NOTE: To move the side guides, first pull out the tray fully, then push down the
green lock at the rear of the tray.
13. Attach the appropriate paper tray number decal [B] to each paper tray.
NOTE: Paper tray number decals are also used for the optional paper tray or
the optional LCT. Keep any remaining decals for use with these
optional units.
B089I103.WMF
B089I503.WMF
[A]
[B]
To Next Page
Loading...
