1-BIN TRAY UNIT INSTALLATION
B089/B093 3-26 SM
3.7.2 INSTALLATION PROCEDURE
CAUTION
Unplug the copier power cord before starting the following procedure.
NOTE: Before installing this 1-bin tray unit, the optional interchange unit (B416)
must be installed.
1. Remove all tapes.
2. If the optional bridge unit has been installed, open the right jam removal cover
[A] of the bridge unit.
If the optional bridge unit is not installed, skip this step.
B413I501.WMF
[A]
To Next Page
Loading...
