BRIDGE UNIT INSTALLATION
B089/B093 3-40 SM
4. Remove the cover [A].
5. Install the bridge unit [B] ( x 1 shoulder, x 1 knob).
6. Reinstall the front right cover [C].
7. Connect the cable [D] to the main machine.
8. Attach the securing plate [E], as shown.
NOTE: Do not attach it with a screw; this is done when securing the front stand
for the optional finisher.
9. Install the optional finisher (refer to the finisher installation procedure).
B417I103.WMF
B417I104.WMF
[E]
[A]
[B]
[C]
[D]
To Next Page
Loading...
